Power operation, starting from no-load low-speed start, slowly progressing to the rated operation of the specified conditions. The inspection items during the test run are whether there is abnormal sound, FAG bearing temperature change, smoothing agent leakage or discoloration, and so on. If an abnormality is found, stop the operation immediately, check the machine, and remove the bearing check if necessary.
After the forklift bearing device is completed, in order to check whether the device is correct, stop the operation check. The small machine can be rotated by hand to confirm that it can rotate smoothly. The inspection items have poor operation due to foreign matter, scratches, and indentations. Due to poor equipment, the torque generated by the device seat is unstable, and the torque caused by excessive clearance, device error, and sealing friction is too large. Wait. If there is no abnormality, the power can be started.
Large machinery cannot be rotated manually, so the power is cut off immediately after the start of the no-load, and the machine is idling, checking for vibration, noise, contact with rotating parts, etc., and confirming that there is no abnormality, the power is turned on.
The rotation of the bearing is checked with a stethoscope, etc., and there are strong metal noise, abnormal sounds, irregular sounds, etc. to clarify the abnormality. The reason is that the smoothness is poor, the accuracy of the shaft or the bearing housing is poor, the FAG bearing is damaged, and the foreign matter is invaded.
Medium and large ball bearings, when the grease is smooth, especially in the winter, low temperature and other environmental conditions, there will be problems with the rolling sound. Ordinary, even if the rolling sound is attacked, the temperature of the bearing will not rise, and it will not affect the fatigue life, smooth grease life, and can be used normally.
Forklift bearing temperature can be measured according to the external temperature of the bearing housing. However, the application of the oil hole directly measures the temperature of the outer ring of the bearing more accurately. The bearing temperature is gradually increased from the beginning of the operation, and the temperature is usually stable after 1 to 2 hours. If the forklift bearing device is defective, the temperature will rise sharply and it will be abnormally high temperature. The reasons are such as excessive smoothing agent, too small FAG bearing clearance, poor installation, excessive sealing and installation friction. The reason for the high-speed rotation, the bearing structure, and the selection of the smooth method are also the reasons.
The grease lubrication method has the characteristics of simple and easy operation, convenient roll replacement, and wide application. The appropriate grease should be selected according to the working temperature, rotation speed, rolling force, sealing waterproof performance, impact vibration size, and grease supply method of the rolling mill bearing. Greases of regular manufacturers with high temperature resistance, high viscosity, excellent extreme pressure performance and high water repellency resistance should be selected. According to the working characteristics of the rolling mill bearing, 2#, 3#, lithium base grease or polyurea containing EP additive should be selected.
For more information and purchase please visit: https://www.supplyforever.com
