Maintenance method of stone engraving machine

Many manufacturers buy stone engraving machines and often neglect the maintenance of equipment. When thinking about equipment to create benefits for the company, we must also consider that the stone machine also needs normal rest and maintenance. There are several points to note:
1. The continuous running time is less than 10 hours per day to ensure the cleaning of the cooling water and the normal operation of the pump. The water-cooled spindle motor must not be dehydrated, and the cooling water should be replaced regularly to prevent the water temperature from being too high.
2. The machine should be cleaned up in time. Stone engraving machine will produce a lot of dust during use, and excessive dust will have a great impact on the life of stone engraving machine. Therefore, be sure to clean the dust on the platform and transmission system after each use, and regularly lubricate the transmission system (X.Y.Z three-axis).
3. If the machine is not used for a long time, it should be refilled regularly (weekly) to ensure the flexibility of the transmission system.
4. Regularly (depending on the use) clean the dust inside the electrical box, check the terminal screw is loose, to ensure safe and reliable use of the circuit.
5. When the stone engraving machine is used, the power must be cut off. After the monitor has no display and the main circuit power indicator is off, it can be left. This can extend the service life of the stone engraving machine.